Questions and answers on how to convert things from one unit or system to another
Forum rules
Dear convert-me.com forum visitors,
Our forum has been available for many years. In September 2014 we decided to switch it to read-only mode. Month after month we saw less posts with questions and answers from real people and more spam posts. We were spending more and more resources cleaning the spam until there were less them 1 legitimate message per 100 spam posts. Then we decided it's time to stop.
All the posts in the forum will be available and searchable. We understand there are a lot of useful information and we aren't going to remove anything. As for the new questions, you can always ask them on
convert-me.com FaceBook pageThank you for being with us and sorry for any inconveniences this could caused.
Sat Sep 18, 2010 12:44 am
I have a chinese pressure regulator for a fire machine / flame cannon. It has 2 gauges ranging from .0 Mpa to 0.25 MPa and another ranging from 0 to 2.5 MPa.
I did the conversion here , trying to find a pressure regulator from the US that will replicate the chinese regulator. Seems like 30 psi = .2 MPa +/- . I called a propane regulator supply company that says the conversion is 72 psi . This left me a bit confused. Any thoughts?
Fri Sep 24, 2010 2:41 pm
ezeltmann wrote:I have a chinese pressure regulator for a fire machine / flame cannon. It has 2 gauges ranging from .0 Mpa to 0.25 MPa and another ranging from 0 to 2.5 MPa.
I did the conversion here , trying to find a pressure regulator from the US that will replicate the chinese regulator. Seems like 30 psi = .2 MPa +/- . I called a propane regulator supply company that says the conversion is 72 psi . This left me a bit confused. Any thoughts?
Maybe the supply company you called looked at the wrong conversion? 30 psi = 0.2068 MPa
More info
Powered by phpBB © phpBB Group.
