Questions and answers on how to convert things from one unit or system to another
Forum rules
Dear convert-me.com forum visitors,
Our forum has been available for many years. In September 2014 we decided to switch it to read-only mode. Month after month we saw less posts with questions and answers from real people and more spam posts. We were spending more and more resources cleaning the spam until there were less them 1 legitimate message per 100 spam posts. Then we decided it's time to stop.
All the posts in the forum will be available and searchable. We understand there are a lot of useful information and we aren't going to remove anything. As for the new questions, you can always ask them on
convert-me.com FaceBook pageThank you for being with us and sorry for any inconveniences this could caused.
Fri Jan 25, 2008 2:39 am
Hi,
I need help converting Kg/cm to N/mm2. I realize they are different types of measurement and cannot normally be compared. However, I have two different tensile strength test results, one in Kg/cm and one in N/mm2. (both from adidas) The sample is 3.00mm thick and 25.54mm wide.
If anyone can help I would greatly appreciate it.
Thanks
Sun Apr 20, 2008 2:53 pm
Dear jon
You can convert N/mm2 to Kg/cm2 by multiplying the value in N/mm2 by 10.194
For converting Kg/cm2 to N/mm2 you can divide the value in Kg/cm2 to 10.194
Tip: as a thumb rule each N/mm2 equals to 10 Kg/cm2, thus you can multiple the value in N/mm2 by 10 to convert it to Kg/cm2.
Thu May 14, 2009 9:46 pm
Hi,
can you help me?
I need to convert 23,9kg/cm² to Megalpascal.
Regards
Karafi
Thu May 14, 2009 10:22 pm
Sorry I mean MEGAPASCAL
Fri May 15, 2009 12:40 am
karafi@isomarbre.com wrote:Hi,
can you help me?
I need to convert 23,9kg/cm² to Megapascal.
Regards
Karafi
I assume you mean 23.9 kg
f/cm2 to Megapascal.
23.9 kgf/cm2 * 0.0980665 = 2.34 Mpa (Megapascal)
Fri May 15, 2009 3:23 am
Many thanks
Fri May 15, 2009 7:51 pm
1 more question:
What is f [/b] in kgf/cm2?
Regards
Karafi
Fri May 15, 2009 7:52 pm
sorry the question is:
1 more question:
What is f in kgf/cm2?
Regards
Karafi
Sat May 16, 2009 1:05 am
karafi@isomarbre.com wrote:sorry the question is:
1 more question:
What is f in kgf/cm2?
Regards
Karafi
Hi Karafi:
The f stands for force, which is an influence that can produce a change in the velocity or deformation of an object.
See:
http://en.wikipedia.org/wiki/Force
Sat May 16, 2009 12:38 pm
Thank you Dirtman
Have a nice WE
Karafi
Fri Jul 03, 2009 3:34 am
Hi I have a question , if material have 1,8Nmm2 it can hold 18,882 kg/cm2? it means it will hold a 1,5kg thing at any circumstances?
Thu Jul 14, 2011 11:11 am
Hi,
how to convert Y.S 77.3 Kg/mm2 to N/MM2 OR PSI
Thanks.
Thu Sep 29, 2011 10:48 pm
How do I work out support area using the following formula
Support area A (cm2) = Supporting force F (N)
____________________
Load-bearing capacity of ground (N/CM2)
= 32.9 KN
______
25 N/CM2
= Suport area ?
Many thanks for any help
Tue Apr 16, 2013 7:37 pm
karafi@isomarbre.com wrote:1 more question:
What is f [/b] in kgf/cm2?
Regards
Karafi
Kilograms in
Force
Tue Sep 10, 2013 6:10 pm
It is very to convert kg/cm to N/mm2.
Please check this
1 KG=9.81 N
1mm= 0.1cm
1sqmm= 0.1x.01 cm=.02sqcm
1n/sqmm=490kg/sqcm
If you start using this formulas to calcualte the counts, it would be pretty easy for you to handle.
More info
Powered by phpBB © phpBB Group.
