Disscussing old, rare, very specific or otherwise uncommon units and measurements
Forum rules
Dear convert-me.com forum visitors,
Our forum has been available for many years. In September 2014 we decided to switch it to read-only mode. Month after month we saw less posts with questions and answers from real people and more spam posts. We were spending more and more resources cleaning the spam until there were less them 1 legitimate message per 100 spam posts. Then we decided it's time to stop.
All the posts in the forum will be available and searchable. We understand there are a lot of useful information and we aren't going to remove anything. As for the new questions, you can always ask them on
convert-me.com FaceBook pageThank you for being with us and sorry for any inconveniences this could caused.
Thu Jun 17, 2004 9:13 am
An "iron" is an old, but still used, measurement of the thickness of leather. It it still in common use by the shoe industry, usually for the thickness of the sole of shoes. One iron is equal to 1/48 inch, so a sole 3 Irons thick would be 3/48" or 1/16", which would be .0625". This unit is believed to have originated when a piece of iron of a known thickness was used as a guage for the thickness of leather. Today the unit is also used for the thickness of insoles, which are often synthetic being made from cellulose pulp in a paper mill. These synthetics are more compressable than leather so they usually run "heavy". For example a 3 Iron synthetic would typically be around .070".
More info
Powered by phpBB © phpBB Group.
